Quick Answer: What To Do When JioFi Is Not Working?

How can I speed up my Jio?

To increase the speed of your Jio 4G internet, do this:Dial *#*#4636#*#*Select the option of phone information.Select the “Set preferred network type” option.Select LTE only..

Why is my JioFi slow?

Check the status of the network indicator on your JioFi: Blue or 2-4 network signal bars indicates you are in a medium coverage area. Red or less than 2 network signal bars indicates low coverage area, due to that you are getting slow internet speed. Click here to raise your concern through a Service Request.

How do I factory reset my router?

How to Reset a RouterKeep your router plugged in.Find your router’s reset button. This will be on the back or the bottom of your router.Use a paperclip to hold down the reset button for 30 seconds.Release the button.Wait for the router to power back on.

Why is my JioFi not starting?

You can reset JioFi router to fix its problems. … Just grab a screwdriver and put it into the reset slot and press and hold the button until your JioFi router restarts then release then button. Now check your JioFi device. It should work properly now.

Can I use Airtel SIM in JioFi?

The Reliance JioFi comes with a Reliance Jio SIM that, once activated, can be used to connect to the network. You can of course use SIM cards of other operators in the JioFi if needed, though obviously you will need to pay for usage on that network.

What does blue light on JioFi mean?

JioFi blue light means: JioFi blue light means device is getting medium signal which will end up with low internet speed. Green light: Green indicator reflects good signal strength which means JioFi will be able to provide your optimum internet speed.

Can JioFi work without battery?

jiofi 3 works without battery and turn off and on with power off and on. Ideally should work same with usb. … One needs to press power button on device to turn it on/off wen battery inside.

What to do if JioFi is not working?

Solution 2. Hard Reset JioFiThe first thing you need to do is to disconnect all the devices connected to JioFi.Then, get your JioFi and uncover the back. … Look for the reset button that is usually located beside the battery.Using a sim ejector or a pin, press the button inside for approximately 10-30 seconds.More items…•

Can JioFi be repaired?

In case the defect still remains, Device care team shall direct the User to visit the nearest Jio Centre. The Jio Centre shall validate the JioFi device for defect and if the JioFi device is found to be defective, replacement or repair of the JioFi device shall be provided.

How do I reset my JioFi?

How To Factory Reset JioFi Settings?Take the JioFi device in your hand and take off the back cover from the JioFI router.Now, locate the hidden RESET button on the back of the router. … Now, take a small, sharp object such as a needle or toothpick and press the button for about 15-30 seconds without letting it go.More items…

Which is the fastest JioFi?

Reliance Jio has launched JioFi JMR815 Wireless Data Card, a new version of its 4G LTE hotspot. As per Reliance, the new device offers download speeds of up to 150 Mbps and upload speeds of up to 50 Mbps, along with unlimited audio calls to its users through the Jio 4G Voice App.

Why does JioFi battery swell?

Jiofi battery swelling and bulgingis a problem reported by many users across the country. This usually happens if you leave the device connected to charger for a long duration. Any Li-Ion battery will face similar consequence.

How can I speed up my Jio dongle?

Check The Maximum Jio 4G Speed In Your AreaInstall Internet Speed Meter Lite App from Google Play.Change the settings on your phone to connect to the mobile network at Band 40.Install the JioTV app.Launch RIL AGM channel and set the Quality to High.Check the speed metre at intervals and note down the maximum speed.More items…•

How many devices can be connected to JioFi?

10 devicesJioFi device allows multiple users and mobile devices to access Jio’s 4G high-speed internet connectivity and create a personal Wi-Fi hotspot. JioFi device can connect a minimum of 10 devices + 1 USB connection, with some models having the ability to support many more connections.

Why my Jio hotspot is not working?

To use the phone with the Jio SIM inside it as hotspot, ensure that the Jio data is working in your phone. Then go to Settings > Wireless & Networks > Tethering & Portable Hotspot > Toggle Portable Wi-Fi Hotspot. Although before you turn on the hotspot, do this one-time thing: Tap on the Set up Wi-Fi Hotspot.

What does WPS button do in JioFi?

WPS stands for Wi-Fi Protected Setup. It is a wireless network security standard that tries to make connections between a router and wireless devices (cameras) faster and easier. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols.

How do I factory reset my JioFi 4?

To turn OFF the device, press and hold the Power button for 3 seconds. Occasionally, you may need to perform a Factory reset when you forget login username or password. To reset, press the Power button and the WPS button simultaneously for 5 seconds. The four LED indicators will blink in blue at the same time.